Improvement of microstructural, mechanical and tribological characteristics of A413 cast Al alloys using friction stir processing TS Mahmoud, SS Mohamed Materials Science and Engineering: A 558, 502-509, 2012 | 78 | 2012 |
Review multi pass friction stir processing E Moustafa, S Mohammed, S Abdel-Wanis, T Mahmoud, ES El-Kady American Scientific Research Journal for Engineering, Technology, and …, 2016 | 24 | 2016 |
Prediction and optimization of cutting temperature on hard-turning of AISI H13 hot work steel AA Elsadek, AM Gaafer, SS Mohamed, AA Mohamed SN Applied Sciences 2, 1-12, 2020 | 18 | 2020 |
Road Preview Control for Active Suspension System MM Kaldas, AMA Soliman, SA Abdallah, SS Mohammad, FF Amien SAE International Journal of Vehicle Dynamics, Stability, and NVH 6 (10-06 …, 2022 | 15 | 2022 |
An Investigation on the mechanical and physical properties of AL6061/SiCp/Gr metal matrix composites SS Mohamed, SA Abdallah, HKH Alazemi International Journal of Engineering and Applied Sciences 5 (3), 257269, 2018 | 11 | 2018 |
Effect of strain hardening and aging processes on microstructure evolution, tensile and fatigue properties of cast Ti-6Al-2Sn-2Zr–2Mo-1.5 Cr-2Nb-0.1 Si alloy RN Elshaer, MSS El-Deeb, SS Mohamed, KM Ibrahim International Journal of Metalcasting 16 (2), 723-737, 2022 | 10 | 2022 |
Influence of welding process and electrode material on the corrosion characteristics of AISI 304 and AISI 316 weldments S BA, S S Mohammed Engineering Research Journal-Faculty of Engineering (Shoubra) 45 (1), 7-12, 2020 | 6 | 2020 |
Microstructure and Mechanical Properties of AA2024/Al2O3 Surface Nanocomposites Fabricated Using Friction Stir Processing EBSS Mohamed ENGINEERING RESEARCH JOURNAL (ERJ) 36, 1-6, 2018 | 6* | 2018 |
Characterization of elastic modulus for AA2024/Al2O3 Nanocomposite beam obtained from dynamic and static methods E Moustafa, S Mohammed, S Abdel-Wanis, T Mahmoud, ES El-Kady Int. J. Res. Dev. Technol. 6 (11), 124-128, 2016 | 6 | 2016 |
Surface roughness prediction in hard-turning with ANN and RSM AA Elsadek, AM Gaafer, SS Mohamed Journal of the Egyptian society of Tribology 17 (2), 13-22, 2020 | 5 | 2020 |
Taguchi optimization for AA2024/Al2O3 surface composite hardness fabricating by Friction stir processing EB Moustafa, S Mohammed, S Abdel-Wanis, MS Abd-Elwahed, ... International Research Journal of Engg. and Technol 3, 7-10, 2016 | 5 | 2016 |
Mechanical and tribological characteristics of epoxy based PMC’s reinforced with different ceramic particulates SS Mohamed, TS Mahmoud, IS Eimahallawi ENGINEERING RESEARCH JOURNAL 121, 29-49, 2009 | 4 | 2009 |
Artificial neural network modelling of the surface roughness of friction stir welded AA7020-T6 aluminum alloy I Abdullah, S S Mohammed, S A Abdallah Engineering Research Journal-Faculty of Engineering (Shoubra) 46 (1), 1-5, 2020 | 3 | 2020 |
Effect of electrode type on the characteristics of AISI 316 Stainless Steel M Mosaad, S S Mohamed Engineering Research Journal-Faculty of Engineering (Shoubra) 44 (1), 5-9, 2020 | 3 | 2020 |
Influence of friction STIR processing on the microstructural, hardness and tribological characteristics of A356 cast aluminium alloy microstructural AO Shiba, SS Mohamed, TS Mahmoud Characteristics, 24-31, 2018 | 3 | 2018 |
Mechanical and Dynamic Behaviour of Epoxy/Mwcnts and Epoxy/Al2O3 Nanocomposites SM Mohammed, M Gamil, SS Mohammed Nano Sci Nano Technol 11 (2), 121, 2017 | 3 | 2017 |
A comprehensive study of Al-Cu-Mg system reinforced with nano-ZrO2 particles synthesized by powder metallurgy technique EB Moustafa, A Aljabri, WS Abushanab, E Ghandourah, MA Taha, ... Scientific Reports 14 (1), 2862, 2024 | 2 | 2024 |
Impact of Welding Processing Parameters on The Microstructure Grain Refinement and Hardness Behavior of The Aluminum AA1050 AS Hassan, EB Moustafa, SS Mohamed Egyptian Journal of Chemistry 66 (12), 291-302, 2023 | 2 | 2023 |
Microstructural and Mechanical Characterization of the Dissimilar AA7075 and AA2024 Aluminum Alloys Reinforced with Different Carbide Particles Welded by Friction Stir Welding EB Moustafa, M Sharaf, G Alsoruji, AO Mosleh, SS Mohamed, H Hussein Journal of Composites Science 7 (11), 448, 2023 | 2 | 2023 |
Fatigue properties and simulation of thin wall ADI and IADI castings MM Ibrahim, AM Negm, SS Mohamed, KM Ibrahim International Journal of Metalcasting, 1-16, 2022 | 2 | 2022 |