Process of selective laser sintering of polymer powders: Modeling, simulation, and validation A Mokrane, M Boutaous, S Xin Comptes Rendus. Mécanique 346 (11), 1087-1103, 2018 | 86 | 2018 |
Thermally and flow induced crystallization of polymers at low shear rate M Boutaous, P Bourgin, M Zinet Journal of Non-Newtonian Fluid Mechanics 165 (5-6), 227-237, 2010 | 61 | 2010 |
Numerical simulation and thermal analysis of the filling stage in the injection molding process: Role of the mold‐polymer interface R El Otmani, M Zinet, M Boutaous, H Benhadid Journal of Applied Polymer Science 121 (3), 1579-1592, 2011 | 57 | 2011 |
Numerical modeling of nonisothermal polymer crystallization kinetics: Flow and thermal effects M Zinet, R El Otmani, M Boutaous, P Chantrenne Polymer Engineering & Science 50 (10), 2044-2059, 2010 | 57 | 2010 |
Thermophysical analysis and modeling of the crystallization and melting behavior of PLA with talc: Kinetics and crystalline structures Z Refaa, M Boutaous, S Xin, DA Siginer Journal of Thermal Analysis and Calorimetry 128, 687-698, 2017 | 40 | 2017 |
Multiphysical modeling of the heating phase in the polymer powder bed fusion process L Xin, M Boutaous, S Xin, DA Siginer Additive Manufacturing 18, 121-135, 2017 | 34 | 2017 |
Numerical modeling of the heating phase of the selective laser sintering process L Xin, M Boutaous, S Xin, DA Siginer International Journal of Thermal Sciences 120, 50-62, 2017 | 30 | 2017 |
Balling phenomenon in metallic laser based 3D printing process M Boutaous, X Liu, DA Siginer, S Xin International Journal of Thermal Sciences 167, 107011, 2021 | 27 | 2021 |
Parametric study of the crystallization kinetics of a semi-crystalline polymer during cooling M Boutaous, N Brahmia, P Bourgin Comptes rendus mecanique 338 (2), 78-84, 2010 | 21 | 2010 |
Energy saving potential of phase change materials-enhanced building envelope considering the six Moroccan climate zones A Louanate, RE Otmani, K Kandoussi, MH Boutaous, D Abdelmajid Journal of Building Physics 45 (4), 482-506, 2022 | 20 | 2022 |
Measurement and numerical simulation of the self heating of cross-linked segmented polyurethanes under cyclic loading PG Pichon, M Boutaous, F Méchin, H Sautereau European polymer journal 48 (4), 684-695, 2012 | 20 | 2012 |
Dynamic modeling and performance assessment of single and double phase change material layer–integrated buildings in Mediterranean climate zone A Louanate, RE Otmani, K Kandoussi, MH Boutaous Journal of Building Physics 44 (5), 461-478, 2021 | 19 | 2021 |
Crystallization kinetics of poly-(lactic acid) with and without talc: Optical microscopy and calorimetric analysis Z Refaa, M Boutaous, F Rousset, R Fulchiron, M Zinet, S Xin, P Bourgin AIP Conference Proceedings 1593 (1), 342-346, 2014 | 19 | 2014 |
PLA crystallization kinetics and morphology development Z Refaa, M Boutaous, DA Siginer International Polymer Processing 33 (3), 336-344, 2018 | 16 | 2018 |
Non-isothermal crystallization kinetics of paraffin wax as a phase changing energy storage material A Louanate, R El Otmani, K Kandoussi, MH Boutaous Physica Scripta 95 (10), 105003, 2020 | 14 | 2020 |
Thermophysical characterization and crystallization kinetics of semi-crystalline polymers M Zinet, Z Refaa, M Boutaous, S Xin, P Bourgin Journal of Modern Physics 4 (07), 28, 2013 | 14 | 2013 |
Synergistic effects of shear flow and nucleating agents on the crystallization mechanisms of Poly (Lactic Acid) Z Refaa, M Boutaous, S Xin, R Fulchiron Journal of Polymer Research 24, 1-13, 2017 | 13 | 2017 |
Computations of unsteady cavitation with a pressure-based method I Senocak, W Shyy Fluids Engineering Division Summer Meeting 36975, 1393-1399, 2003 | 13 | 2003 |
Numerical simulation of the filling phase in the polymer injection moulding process with a conservative level set method R El Otmani, M Zinet, M Boutaous, P Chantrenne, H Benhadid International Journal of Material Forming 1, 731-734, 2008 | 12 | 2008 |
Modeling and tension control of an industrial winder with dancer mechanism D Knittel, L Federlin, M Boutaous, P Bourgin, M Loesch, B Muller IFAC Symposium MMM, 2004 | 11 | 2004 |