Magnesium metal matrix composites-a review A Dey, KM Pandey Rev. Adv. Mater. Sci 42 (1), 58-67, 2015 | 202 | 2015 |
Fabrication of metal matrix composites by powder metallurgy: a review G Manohar, A Dey, KM Pandey, SR Maity AIP conference proceedings 1952 (1), 2018 | 78 | 2018 |
Optimization of electrical discharge machining process parameters for Al6061/cenosphere composite using grey-based hybrid approach A Dey, S Debnath, KM Pandey Transactions of Nonferrous Metals Society of China 27 (5), 998-1010, 2017 | 62 | 2017 |
Characterization of fly ash and its reinforcement effect on metal matrix composites: A review A Dey, KM Pandey Rev. Adv. Mater. Sci 44 (2), 168-181, 2016 | 58 | 2016 |
Selection of optimal processing condition during WEDM of compocasted AA6061/cenosphere AMCs based on grey-based hybrid approach A Dey, KM Pandey Materials and Manufacturing Processes 33 (14), 1549-1558, 2018 | 31 | 2018 |
Tribological behaviour of Magnesium Metal Matrix Composites reinforced with fly ash cenosphere N Niraj, KM Pandey, A Dey Materials Today: Proceedings 5 (9), 20138-20144, 2018 | 29 | 2018 |
Wire electrical discharge machining characteristics of AA6061/cenosphere as-cast aluminum matrix composites A Dey, KM Pandey Materials and Manufacturing Processes 33 (12), 1346-1353, 2018 | 27 | 2018 |
Processing of hardened steel by MQL technique using nano cutting fluids A Das, SK Patel, M Arakha, A Dey, BB Biswal Materials and Manufacturing Processes 36 (3), 316-328, 2021 | 26 | 2021 |
Wear behaviour of Mg alloys and their composites–a review A Dey, KM Pandey International journal of materials research 109 (11), 1050-1070, 2018 | 24 | 2018 |
Aluminium metal matrix composite with rice husk as reinforcement: a review AK Yadav, KM Pandey, A Dey Materials Today: Proceedings 5 (9), 20130-20137, 2018 | 24 | 2018 |
Wire electrical discharge machining characteristics of AA6061/cenosphere aluminium matrix composites using RSM A Dey, VRR Bandi, KM Pandey Materials Today: Proceedings 5 (1), 1278-1285, 2018 | 24 | 2018 |
Analysis of effect of machining parameters during electrical discharge machining using Taguchi-based multi-objective PSO A Dey, M Debnath, KM Pandey International Journal of Computational Intelligence and Applications 16 (02 …, 2017 | 23 | 2017 |
Selection of optimal processing condition during removal of Reactive Red 195 by NaOH treated jute fibre using adsorption AD Amit Kumar Dey Groundwater for Sustainable Development, 2020 | 22* | 2020 |
Machinability of cenosphere particulate–reinforced AA6061 aluminium alloy prepared by compocasting M Rahman, A Dey, KM Pandey Proceedings of the Institution of Mechanical Engineers, Part B: Journal of …, 2018 | 20 | 2018 |
Adsorption characteristics of methyl red dye by Na2CO3-treated jute fibre using multi-criteria decision making approach AK Dey, A Dey, R Goswami Applied Water Science 12 (8), 179, 2022 | 18 | 2022 |
Use of response surface methodology for the optimization of process parameters for the removal of Congo Red by NaOH treated jute fibre. AK Dey, U Kumar, A Dey Desalination and Water Treatment 115, 300-314, 2018 | 15 | 2018 |
Experimental investigation and optimization of dry sliding wear test parameters of aluminum based composites MM Khan, A Dey, MI Hajam Silicon 14 (8), 4009-4026, 2022 | 14 | 2022 |
Adsorption of reactive red 195 from polluted water upon Na2CO3 modified jute fibre AK Dey, U Kumar Int. J. Eng. Technol 9, 53-58, 2017 | 13 | 2017 |
Selection of optimal processing condition during abrasive wear of in-situ ZA-37/TiCp composites using MCDM technique MM Khan, A Dey Ceramics International 47 (14), 20090-20107, 2021 | 12 | 2021 |
Selection of optimal processing condition during removal of methylene blue dye using treated betel nut fibre implementing desirability based RSM approach AK Dey, A Dey Response surface methodology in Engineering Science, 2021 | 11 | 2021 |