| Hole-quality evaluation in drilling fiber-reinforced composites A Hrechuk, V Bushlya, JE Ståhl Composite Structures 204, 378-387, 2018 | 73 | 2018 |
| Experimental investigations into tool wear of drilling CFRP A Hrechuk, V Bushlya, R M’Saoubi, JE Ståhl Procedia Manufacturing 25, 294-301, 2018 | 32 | 2018 |
| Too sharp for its own good–Tool edge deformation mechanisms in the initial stages of metal cutting SVA Laakso, T Zhao, M Agmell, A Hrechuk, JE Ståhl Procedia Manufacturing 11, 449-456, 2017 | 19 | 2017 |
| Thermodynamic modeling framework for prediction of tool wear and tool protection phenomena in machining A Bjerke, A Hrechuk, F Lenrick, A Markström, H Larsson, S Norgren, ... Wear 484, 203991, 2021 | 15 | 2021 |
| Onset of the degradation of CVD α-Al2O3 coating during turning of Ca-treated steels A Bjerke, A Hrechuk, F Lenrick, R M'Saoubi, H Larsson, A Markström, ... Wear 477, 203785, 2021 | 15 | 2021 |
| Quantitative analysis of chip segmentation in machining using an automated image processing method A Hrechuk, V Bushlya, R M’Saoubi, JE Ståhl Procedia Cirp 82, 314-319, 2019 | 12 | 2019 |
| An analytical method for continuously predicting mechanics and residual stress in fillet surface turning J Weng, Y Liu, K Zhuang, D Xu, R M'Saoubi, A Hrechuk, J Zhou Journal of Manufacturing Processes 68, 1860-1879, 2021 | 10 | 2021 |
| Novel metric “Implenarity” for characterization of shape and defectiveness: the case of CFRP hole quality A Hrechuk, V Bushlya, JE Ståhl, V Kryzhanivskyy Composite Structures 265, 113722, 2021 | 8 | 2021 |
| Small scale testing of PCD and WC-Co tooling in rock cutting using longitudinal turning D Johansson, A Hrechuk, V Bushlya, M Mårtensson, A Can, JE Ståhl Wear 426, 1515-1522, 2019 | 8 | 2019 |
| Application of Colding tool life equation on the drilling fiber reinforcement polymers A Hrechuk, D Johansson, V Bushlya, L Devin, JE Ståhl Procedia Manufacturing 25, 302-308, 2018 | 7 | 2018 |
| FE analysis on the association between tool edge radius and thermal-mechanical load in machining Inconel 718 Y Liu, A Hrechuk, M Agmell, A Ahadi, JE Stahl, J Zhou Procedia CIRP 102, 91-96, 2021 | 6 | 2021 |
| Automated detection of tool wear in machining and characterization of its shape A Hrechuk, V Bushlya Wear 523, 204762, 2023 | 3 | 2023 |
| Recognition of drilling-induced defects in fiber reinforced polymers using machine learning A Hrechuk Procedia CIRP 117, 384-389, 2023 | 2 | 2023 |
| On chemical interactions between an inclusion engineered stainless steel (316L) and (Ti, Al) N coated tools during turning A Bjerke, F Lenrick, A Hrechuk, K Slipchenko, R M'Saoubi, JM Andersson, ... Wear 532, 205093, 2023 | 1 | 2023 |
| Drilling Hols in Fiber-reinforcement Composite Materials: A Literature Review A Hrechuk Faculty of Engineering, Lund University, 2016 | 1 | 2016 |
| Research solution for automatic hole quality analysis when drilling fiber-reinforced composites A Hrechuk, M Hörndahl, F Schultheiss The International Journal of Advanced Manufacturing Technology 127 (7), 3315 …, 2023 | | 2023 |
| Підвищення ефективності процесу свердління вуглепластиків та склопластиків лезовими алмазними свердлами A Hrechuk | | 2019 |
| Моніторинг процесу свердління композиційних матеріалів реєстрацією сигналу акустичної емісії АІ Гречук, ЛН Девін, ОВ Глоба КПІ ім. Ігоря Сікорського, 2018 | | 2018 |
| Підвищення якості свердління отворів в волокнистих композиційних матеріалах A Hrechuk, А Globa, L Devin Вісник Київського політехнічного інституту. Серія Приладобудування, 80-85, 2017 | | 2017 |
