| Application of fracture mechanics for energetic effects predictions while wood sawing KA Orlowski, T Ochrymiuk, A Atkins, D Chuchala Wood Science and Technology 47, 949-963, 2013 | 91 | 2013 |
| The effect of wood provenance and density on cutting forces while sawing Scots pine (Pinus sylvestris L.) D Chuchala, KA Orlowski, A Sandak, J Sandak, D Pauliny, J Barański BioResources 9 (3), 5349-5361, 2014 | 40 | 2014 |
| Study of a multicriterion decision-making approach to the MQL turning of AISI 304 steel using hybrid nanocutting fluid V Dubey, AK Sharma, P Vats, DY Pimenov, K Giasin, D Chuchala Materials 14 (23), 7207, 2021 | 32 | 2021 |
| Effect of thermal treatment of birch wood by saturated water vapor on granulometric composition of chips from sawing and milling processes from the point of view of its … R Kminiak, KA Orlowski, L Dzurenda, D Chuchala, A Banski Applied Sciences 10 (21), 7545, 2020 | 29 | 2020 |
| Surface roughness evaluation in thin EN AW-6086-T6 alloy plates after face milling process with different strategies D Chuchala, M Dobrzynski, DY Pimenov, KA Orlowski, G Krolczyk, ... Materials 14 (11), 3036, 2021 | 27 | 2021 |
| Effect of pine impregnation and feed speed on sound level and cutting power in wood sawing R Licow, D Chuchala, M Deja, KA Orlowski, P Taube Journal of cleaner production 272, 122833, 2020 | 24 | 2020 |
| Revisiting the estimation of cutting power with different energetic methods while sawing soft and hard woods on the circular sawing machine: A Central European case KA Orlowski, T Ochrymiuk, L Hlaskova, D Chuchala, Z Kopecky Wood science and technology 54 (2), 457-477, 2020 | 23 | 2020 |
| Cutting model parameters from frame sawing of natural and impregnated Scots pine (Pinus sylvestris L.) G Sinn, D Chuchała, KA Orlowski, P Taube European Journal of Wood and Wood Products 78, 777-784, 2020 | 20 | 2020 |
| On-line measurement of wood surface smoothness J Sandak, K Orłowski, A Sandak, D Chuchała, P Taube Drvna industrija 71, 193-200, 2020 | 19 | 2020 |
| Predicting cutting power for band sawing process of pine and beech wood dried with the use of four different methods D Chuchala, T Ochrymiuk, KA Orlowski, M Lackowski, P Taube BioResources 15 (1), 1844-1860, 2020 | 16 | 2020 |
| Effect of the drying method of pine and beech wood on fracture toughness and shear yield stress D Chuchala, J Sandak, KA Orlowski, T Muzinski, M Lackowski, ... Materials 13 (20), 4692, 2020 | 15 | 2020 |
| The effect of wood drying method on the granularity of sawdust obtained during the sawing process using the frame sawing machine K Orłowski, D Chuchała, T Muziński, J Barański, A Banski, T Rogoziński Acta Facultatis Xylologiae Zvolen 61, 83-92, 2019 | 15 | 2019 |
| Corrosion resistance and surface bioactivity of Ti6Al4V alloy after finish turning under ecological cutting conditions K Leksycki, A Kaczmarek-Pawelska, K Ochał, A Gradzik, DY Pimenov, ... Materials 14 (22), 6917, 2021 | 14 | 2021 |
| The effect of beech wood (Fagus sylvatica L.) steaming process on the colour change versus depth of tested wood layer A Konopka, D Chuchala, KA Orlowski, T Vilkovská, I Klement Wood Material Science & Engineering 17 (6), 420-428, 2022 | 13 | 2022 |
| Influence of drying mode and feed per tooth rate on the fine dust creation in pine and beech sawing on a mini sash gang saw T Rogoziński, D Chuchala, M Pędzik, KA Orlowski, L Dzurenda, ... European Journal of Wood and Wood Products 79 (1), 91-99, 2021 | 12 | 2021 |
| The design development of the sliding table saw towards improving its dynamic properties KA Orlowski, P Dudek, D Chuchala, W Blacharski, T Przybylinski Applied Sciences 10 (20), 7386, 2020 | 10 | 2020 |
| The effect of alternative cutter paths on flatness deviations in the face milling of aluminum plate parts M Dobrzynski, D Chuchala, KA Orlowski Journal of Machine Engineering 18, 2018 | 10 | 2018 |
| Lateral forces determine dimensional accuracy of the narrow-kerf sawing of wood KA Orlowski, D Chuchala, M Szczepanski, W Migda, W Wojnicz, J Sandak Scientific reports 12 (1), 86, 2022 | 8 | 2022 |
| The influence of drying temperature on color change of hornbeam and maple wood used as surface and inner layers of wood composites I Klement, P Vilkovský, T Vilkovská, KA Orłowski, J Barański, D Chuchala, ... Applied Sciences 11 (22), 10673, 2021 | 8 | 2021 |
| On some approaches to cutting power estimation while wood sawing KA Orłowski, T Ochrymiuk, D Chuchała Annals of Warsaw University of Life Sciences SGGW Forestry and Wood …, 2012 | 7 | 2012 |
Kazimierz OrlowskiProfessor, Gdansk University of TechnologyVerified email at pg.gda.pl
