| New perspectives on fuel cell technology: A brief review N Sazali, WN Wan Salleh, AS Jamaludin, MN Mhd Razali Membranes 10 (5), 99, 2020 | 244 | 2020 |
| Effect of degradation by temperature onto nitrile rubber elastomer mechanical properties NAS Abdullah, FF Abdullah, AH Sufian, ANSZ Abidin, AS Jamaludin, ... Materials Today: Proceedings 48, 1941-1946, 2022 | 28 | 2022 |
| Recent study on hard to machine material–micromilling process AM Rosli, AS Jamaludin, MNM Razali Transdisciplinary Research and Education Center for Green Technologies …, 2021 | 22 | 2021 |
| Study On Tire Tread Design Effect onto Tire-road Contact Behavior Through FEM AH Sufian, TZ Xun, ANSZ Abidin, AS Jamaludin, MNM Razali Recent Trends in Manufacturing and Materials Towards Industry 4.0: Selected …, 2021 | 22 | 2021 |
| A Review on Automotive Tires Significant Characteristic Identification for General Consumers ANSZ Abidin, AH Azmi, KAA Kassim, AS Jamaludin, MNM Razali Proceedings of the 2nd Energy Security and Chemical Engineering Congress …, 2022 | 18 | 2022 |
| Tool wear observation during unconventional low speed machining using low cost micromilling AM Rosli, N Jamil, AS Jamaludin, MNM Razali, AR Yusoff Recent Trends in Manufacturing and Materials Towards Industry 4.0: Selected …, 2021 | 18 | 2021 |
| Design of spline surface vacuum gripper for pick and place robotic arms AS Jamaludin, MNM Razali, N Jasman, ANA Ghafar, MA Hadi Journal of Modern Manufacturing Systems and Technology 4 (2), 48-55, 2020 | 18 | 2020 |
| Modelling of Fuzzy Inference System for micro milling—a preliminary study through FEM AM Rosli, AS Jamaludin, MNM Razali, ASA Sani, SB Hamzah, MS Osman RITA 2018: Proceedings of the 6th International Conference on Robot …, 2020 | 17 | 2020 |
| Bold Approach in Finite Element Simulation on Minimum Quantity Lubrication Effect during Machining AM Rosli, AS Jamaludin, MNM Razali, H Akira, T Furumoto, MS Osman Journal of Modern Manufacturing Systems and Technology 2, 33-41, 2019 | 15 | 2019 |
| Temperature and Heat Flow Analysis in a Drying Chamber Through Finite Element Method NH Md Kamil, AS Jamaludin, MN Mhd Razali, AN Abd. Ghaffar Enabling Industry 4.0 through Advances in Manufacturing and Materials …, 2022 | 14 | 2022 |
| Potential Application of Artificial Neural Network (ANN) Analysis Method on Malaysian Road Crash Data AS Jamaludin, ANSZ Abidin, MNM Razali, A Roslan, R Shahril, ZM Jawi, ... Journal of Modern Manufacturing Systems and Technology 5 (2), 95-105, 2021 | 13 | 2021 |
| In-situ worn geometry effect over the surface roughness propagation during micro milling process NF Mohadzir, AM Rosli, AS Jamaludin, MNM Razali Journal of Modern Manufacturing Systems and Technology 4 (1), 1-7, 2020 | 13 | 2020 |
| Surface Texturing Potential on Carbide Insert in Reducing Aluminium Alloy Adhesiveness during Machining CY Qi, MNM Razali, AS Jamaludin, ARA Mokhtar, SB Hamzah, ... Journal of Modern Manufacturing Systems and Technology 2, 42-50, 2019 | 13 | 2019 |
| Analysis on Auger Pump Performance During Handling High Viscous Liquid E Alisha, N Najwa, AS Jamaludin, MNM Razali, S Saffe Journal of Modern Manufacturing Systems and Technology 6 (2), 48-54, 2022 | 11 | 2022 |
| Modelling of PID Speed Control Based Collision Avoidance System LM Keong, AS Jamaludin, MNM Razali, A Abidin, MRM Yasin Journal of Modern Manufacturing Systems and Technology 4 (2), 66-72, 2020 | 11 | 2020 |
| MN Mhd Razali N Sazali, WNW Salleh, AS Jamaludin New perspectives on fuel cell technology: a brief review Membranes 10 (5), 99, 2020 | 10 | 2020 |
| Techno-economic efficiencies and environmental criteria of Ocean Thermal Energy Conversion closed Rankine cycle using different working fluids N Samsuri, N Sazali, AS Jamaludin, MNM Razali IOP Conference Series: Materials Science and Engineering 1062 (1), 012042, 2021 | 6 | 2021 |
| Abd. Ghaffar AN (2022) Temperature and heat flow analysis in a drying chamber through finite element method NH Md Kamil, AS Jamaludin, MN Mhd Razali Lecture notes in mechanical engineering, 309-316, 0 | 6 | |
| Study on polishing mechanism of cemented carbide using blast polishing process K TAKAI, M NIZAR, M UEMURA, M FUKUMOTO Journal of the Japan Society of Abrasive Technology (1st report) 57 (4), 253, 2013 | 5 | 2013 |
| Study on optimal surface property of WC-Co cutting tool for aluminium alloy cutting M Nizar, N Arimatsu, H Kawamitsu, K Takai, M Fukumoto IOP Conference Series: Materials Science and Engineering 114 (1), 012024, 2016 | 4 | 2016 |
Ahmad Shahir JamaludinUniversiti Malaysia Pahang Al-Sultan Abdullah (FTKPM)Verified email at umpsa.edu.my
