| Three-Dimensional Analysis of Extrusion in Complex Die by Using Upper Bound Theory AS Ameed, RN Hwyyin, HK Kadhim Engg. & Tech. Journal 29 (4), 639-50, 2011 | 4 | 2011 |
| Mechanical and Acoustic Properties of Composite Material in a Secondary Roof to Reducing the Cooling Load HKKNFHAJ Mohammed Engineering and Technology Journal 36 (9), 972-978, 2018 | 2 | 2018 |
| Mechanical and Acoustic Properties of Composite Material in a Secondary Roof to Reducing the Cooling Load HKKNFHAJ Mohammed Engineering and Technology Journal 36 (9), 972-978, 2018 | 2 | 2018 |
| New construction of pneumatic residential elevator system JA Mohammed, HK Kadhim, AS Hasan the Iraqi Journal for Mechanical and Material Eng 17 (2), 279-290, 2017 | 2 | 2017 |
| Flutter investigation and deep learning prediction of FG composite wing reinforced with carbon nanotube AJMHK Kadhom* Curved and Layered Structures 11 (Curved and Layered Structures 2024; 11 …, 2024 | 1* | 2024 |
| Performance enhancement of PV panels by a channel shaped heat exchanger with an electromechanical control SRF Hussein A. Idan*, Hatam K. Kadhom Engineering and Technology Journal, 2024 | | 2024 |
| Indentation of sandwich beams: Comparison of Vlasov, Winkler, and shear theories with composite surfaces reinforced by CNTs and ANN model HAMAM Aseel j. Mohammed a , Hatam k. Kadhom a, * , Mohammed Al-Bahrani b International Journal of Non-Linear Mechanics 160 (2025), 2024 | | 2024 |
| The Influence of Thickness and Interference Fit Ratio on Fatigue Phenomenon: An Empirical Study 3 Hatam K. Kadhom1* , Aseel J. Mohammed1 , Mika Sillanpää 2 Mathematical Modelling of Engineering Problems Vol. 11, No. 1, January, 2024 …, 2024 | | 2024 |
| Design and implementation of electromechanical biomedical waste containers powered by solar energy with a smart controller AH Raheem, HK Kadhom, AA Hussein AIP Conference Proceedings 2977 (1), 2023 | | 2023 |
| 2019 Develop and Analyze a Model for Teaching According to the Flipped Class Approach SRF hatam k Kadhom , Ibtisam A. Hasan Engineering and Technology Journal 37 (4), 2019 | | 2019 |
| Modification of Electro-Pneumatic Elevator System depending on the air pressure and flow rate determinations HK Kadhom, FAK Fattah Wasit Journal of Engineering Sciences 6 (2), 56-65, 2018 | | 2018 |
| SUGGESTION RBFNN MODEL FOR THICK COMPOSITE LAMINATED PLATES STRESS ANALYSIS HK Kadhom Iraqi journal of mechanical and material engineering 16 (2), 2016 | | 2016 |
| Numerical Analysis of Elastic Stress Due to Internal Pressure in Elbow Pipe HK Kadhom | | 2015 |
| Determination of radial cutting forces during drilling HK Kadhom Науковий вісник будівництва 75 (1), 152-156, 2014 | | 2014 |
| STUDYING THE EFFECT OF TEMPERATURE ON THE DIFFUSIONOF ALKALINE SOLUTION IN POLYESTER REINFORCEMENT BY FIBERSGLASS DAJM Dr. Wafaa Mahdi S 1, Dr.HatamK. Kadhom2 The Iraqi Journal For Mechanical And Material Engineering, Vol.13, No4, 2013 …, 2013 | | 2013 |
| Mechanical Properties For Pipes Made From Composite Materials (Glass/Epoxy And Carbon/Epoxy) Subjected To Internal Pressure ZK Hantoosh, HK Kadhom, AJ Mohammed Engineering and Technology Journal 30 (6), 117-134, 2012 | | 2012 |
| Studying The Importance of Evaluation And Determination of Volume Fraction Values For Wound Glass And Carbon Fiber Reinforced Composites زينب كاظم حنتوش العامري, حاتم كريم كاظم, أسيل جاسم محمد Engineering and Technology Journal 29 (4), 2011 | | 2011 |
Zainab HantooshAssist.Prof, university of TechnologyVerified email at uotechnology.edu.iq
