Coupled precipitation and yield strength modelling for non-isothermal treatments of a 6061 aluminium alloy D Bardel, M Perez, D Nelias, A Deschamps, CR Hutchinson, ... Acta Materialia 62, 129-140, 2014 | 188 | 2014 |
Modelling of multiple impacts for the prediction of distortions and residual stresses induced by ultrasonic shot peening (USP) T Chaise, J Li, D Nélias, R Kubler, S Taheri, G Douchet, V Robin, P Gilles Journal of Materials Processing Technology 212 (10), 2080-2090, 2012 | 143 | 2012 |
Rolling contact of a rigid sphere/sliding of a spherical indenter upon a viscoelastic half-space containing an ellipsoidal inhomogeneity KE Koumi, T Chaise, D Nelias Journal of the Mechanics and Physics of Solids 80, 1-25, 2015 | 74 | 2015 |
Contact pressure and residual strain in 3D elasto-plastic rolling contact for a circular or elliptical point contact T Chaise, D Nélias | 59 | 2011 |
Semi analytical fretting wear simulation including wear debris V Done, D Kesavan, T Chaise, D Nelias Tribology International 109, 1-9, 2017 | 57 | 2017 |
Contact analysis in the presence of an ellipsoidal inhomogeneity within a half space KE Koumi, L Zhao, J Leroux, T Chaise, D Nelias International Journal of Solids and Structures 51 (6), 1390-1402, 2014 | 49 | 2014 |
Constitutive model for nickel alloy 690 (Inconel 690) at various strain rates and temperatures J Blaizot, T Chaise, D Nélias, M Perez, S Cazottes, P Chaudet International Journal of Plasticity 80, 139-153, 2016 | 47 | 2016 |
A methodology to predict the roughness of shot peened surfaces M Taro, T Chaise, D Nélias Journal of materials processing technology 217, 65-76, 2015 | 41 | 2015 |
Integrated modelling of a 6061-T6 weld joint: From microstructure to mechanical properties D Bardel, M Fontaine, T Chaise, M Perez, D Nelias, F Bourlier, J Garnier Acta Materialia 117, 81-90, 2016 | 40 | 2016 |
Modeling of the contact between a rigid indenter and a heterogeneous viscoelastic material KE Koumi, D Nelias, T Chaise, A Duval Mechanics of Materials 77, 28-42, 2014 | 38 | 2014 |
On the effect of isotropic hardening on the coefficient of restitution for single or repeated impacts using a semi-analytical method T Chaise, D Nelias, F Sadeghi Tribology Transactions 54 (5), 714-722, 2011 | 37 | 2011 |
Modeling of cavitation peening: Jet, bubble growth and collapse, micro-jet and residual stresses E Sonde, T Chaise, N Boisson, D Nelias Journal of Materials Processing Technology 262, 479-491, 2018 | 35 | 2018 |
Three-dimensional rolling/sliding contact on a viscoelastic layered half-space ER Wallace, T Chaise, D Nelias Journal of the Mechanics and Physics of Solids 143, 104067, 2020 | 30 | 2020 |
Fully coupled resolution of heterogeneous elastic–plastic contact problem KV Amuzuga, T Chaise, A Duval, D Nelias Journal of Tribology 138 (2), 021403, 2016 | 30 | 2016 |
A novel approach to investigate delta phase precipitation in cold-rolled 718 alloys ZK Low, T Chaise, D Bardel, S Cazottes, P Chaudet, M Perez, D Nelias Acta Materialia 156, 31-42, 2018 | 23 | 2018 |
3D modelling of tyre-pavement contact pressure P Reynaud, SB Nasr, F Allou, T Chaise, D Nelias, C Petit European Journal of Environmental and Civil Engineering 21 (6), 712-729, 2017 | 21 | 2017 |
Precipitation of γ ″in Inconel 718 alloy from microstructure to mechanical properties A Balan, M Perez, T Chaise, S Cazottes, D Bardel, F Corpace, F Pichot, ... Materialia 20, 101187, 2021 | 16 | 2021 |
Influence of solidification induced composition gradients on carbide precipitation in FeNiCr heat resistant steels M Roussel, X Sauvage, M Perez, D Magné, A Hauet, A Steckmeyer, ... Materialia 4, 331-339, 2018 | 15 | 2018 |
Experimental measurement of dislocation density in metallic materials: a quantitative comparison between measurements techniques (XRD, R-ECCI, HR-EBSD, TEM) J Gallet, M Perez, R Guillou, C Ernould, C Le Bourlot, C Langlois, ... Materials Characterization 199, 112842, 2023 | 14 | 2023 |
Impact-sliding wear response of 2.25 Cr1Mo steel tubes: Experimental and semi-analytical method M Yin, C Thibaut, L Wang, D Nélias, M Zhu, Z Cai Friction, 1-19, 2021 | 12 | 2021 |