Prediction of combustion in homogeneous-charge spark-ignition engines H Weller International Symposium COMODIA 94, 163-169, 1994 | 116 | 1994 |
Effect of radiation on gas turbine combustor liner temperature with conjugate heat transfer (CHT) methodology Y Saygin, S UsLu 52nd AIAA/SAE/ASEE Joint Propulsion Conference, 4784, 2016 | 12 | 2016 |
A case study of combustion modeling in a spark ignition engine using coherent flame model E Hepkaya, S Karaaslan, S Uslu, N Dinler, N Yucel Journal of thermal science and technology 34 (2), 111-121, 2014 | 12 | 2014 |
Exergy analysis of an air-blasted combustor: an application for atmospheric test rig condition A Topal, O Turan, S Uslu, MZ Sogut International Journal of Exergy 20 (1), 1-21, 2016 | 6 | 2016 |
PEM tipi yakıt pilleri için çift kutuplu akış plakalarının modellenmesi A Ekiz, T Camcı, İ Türkmen, M Sankır, S Uslu, DK Baker, E Ağar Journal of The Faculty of Engineering And Architecture of Gazi University, 2011 | 6 | 2011 |
Simulation of noise generation due to blade row interaction in a high speed compressor S Uslu, T Hüttl, K Heinig Aerospace science and technology 8 (4), 299-306, 2004 | 6 | 2004 |
Investigation of the effects of lobe number and configuration on mixing performance in lobed mixer B İper, CC Ergin, B Cenik, TU Suer, S Uslu AIAA Propulsion and Energy 2020 Forum, 3778, 2020 | 5 | 2020 |
Investigation of aeroelastic stability on AGARD 445.6 wing at transonic regime M Ozcatalbas, B Acar, S Uslu 2018 9th International Conference on Mechanical and Aerospace Engineering …, 2018 | 5 | 2018 |
One-dimensional heat transfer analysis and experimental investigation of a gas turbine combustor A Topal, C Catori, L Cagan, S Uslu, O Turan, A Piskin Proceedings of CONV-14: International Symposium on Convective Heat and Mass …, 2014 | 5 | 2014 |
Design of an Atmospheric Combustor Test Rig for small Aero Engine Application A Topal, S Uslu, E Celik, H Battaloglu International Symposium on Air Breathing Engines, 2013 | 4 | 2013 |
Modeling of bipolar plates for proton exchange membrane fuel cells A Ekiz, T Camci, I Turkmen, M Sankir, S Uslu, DK Baker, E Agar | 4 | 2011 |
One-Dimensional Aerodynamic Heating and Ablation Prediction B Şimşek, S Uslu Journal of Aerospace Engineering 32 (4), 04019048, 2019 | 3 | 2019 |
ATOMIZATION AND COMBUSTION CHARACTERISTICS OF IMPINGING INJECTORS IN LIQUID ROCKET ENGINES B Cenik, TU Suer, S Uslu Journal of Propulsion and Power Volume 11, 11, 2019 | 3 | 2019 |
Design of a high pressure turbine nozzle guide vane with effective film cooling system on leading edge F Kiyici, T Aksu, S Uslu 54th AIAA Aerospace Sciences Meeting, 0654, 2016 | 3 | 2016 |
Design, manufacturing and rig test of a small turbojet engine combustor with airblast atomizer A Topal, O Turan, S Uslu International Journal of Materials, Mechanics and Manufacturing 3 (2), 97-100, 2015 | 3 | 2015 |
Exit temperature profile measurement and CFD comparisons on small scale turbojet combustor with air blast atomizer configuration C Catori, A Topal, S Uslu, O Tuncer, L Cagan, S Ozkan, B Kaynaroglu 50th AIAA/ASME/SAE/ASEE Joint Propulsion Conference, 3525, 2014 | 3 | 2014 |
Unsteady RANS for simulation of high swirling non-premixed methane-air flame MB Solmaz, S Uslu, O Uzol 50th AIAA/ASME/SAE/ASEE Joint Propulsion Conference, 3473, 2014 | 3 | 2014 |
Effect of free-play and initial conditions on aeroelastic behavior of a missile canard in supersonic flow M Ozcatalbas, B Acar, S Uslu AIAA Aviation 2020 Forum, 2663, 2020 | 2 | 2020 |
Large-eddy simulation of a full annular RQL combustion chamber & fuel distribution effects on the combustor exit temperature profile OC Kocaman, T Aksu, S Uslu 52nd AIAA/SAE/ASEE Joint Propulsion Conference, 4786, 2016 | 2 | 2016 |
Reacting CFD Simulations Through a Small Turbojet Combustor with Pre-Filming Air-Blast Atomizer E CELIK, S USLU, A TOPAL, H BATTALOGLU 21st ISABE Conference, 2013 | 2 | 2013 |