Roberto Pantani
Roberto Pantani
Department of Industrial Engineering, University of Salerno (Italy)
Verified email at unisa.it - Homepage
TitleCited byYear
Modeling of morphology evolution in the injection molding process of thermoplastic polymers
R Pantani, I Coccorullo, V Speranza, G Titomanlio
Progress in polymer science 30 (12), 1185-1222, 2005
2512005
Effect of PLA grades and morphologies on hydrolytic degradation at composting temperature: assessment of structural modification and kinetic parameters
G Gorrasi, R Pantani
Polymer degradation and stability 98 (5), 1006-1014, 2013
1452013
Crystallization kinetics and solidified structure in iPP under high cooling rates
I Coccorullo, R Pantani, G Titomanlio
Polymer 44 (1), 307-318, 2003
1242003
Crystallization kinetics of virgin and processed poly (lactic acid)
R Pantani, F De Santis, A Sorrentino, F De Maio, G Titomanlio
Polymer Degradation and Stability 95 (7), 1148-1159, 2010
1232010
PLA-ZnO nanocomposite films: Water vapor barrier properties and specific end-use characteristics
R Pantani, G Gorrasi, G Vigliotta, M Murariu, P Dubois
European Polymer Journal 49 (11), 3471-3482, 2013
1222013
Influence of crystallinity on the biodegradation rate of injection-moulded poly (lactic acid) samples in controlled composting conditions
R Pantani, A Sorrentino
Polymer degradation and stability 98 (5), 1089-1096, 2013
1032013
As‐molded shrinkage measurements on polystyrene injection molded products
KMB Jansen, R Pantani, G Titomanlio
Polymer Engineering & Science 38 (2), 254-264, 1998
981998
PLA/H alloysite Nanocomposite Films: Water Vapor Barrier Properties and Specific Key Characteristics
G Gorrasi, R Pantani, M Murariu, P Dubois
Macromolecular Materials and Engineering 299 (1), 104-115, 2014
952014
Nucleation and crystallization kinetics of poly (lactic acid)
F De Santis, R Pantani, G Titomanlio
Thermochimica acta 522 (1-2), 128-134, 2011
922011
Shear-induced nucleation and growth in isotactic polypropylene
R Pantani, I Coccorullo, V Volpe, G Titomanlio
Macromolecules 43 (21), 9030-9038, 2010
882010
Morphology evolution during injection molding: Effect of packing pressure
R Pantani, I Coccorullo, V Speranza, G Titomanlio
AIP Conference Proceedings 907, 969-974, 2007
782007
Thermal and hydrolytic degradation kinetics of PLA in the molten state
V Speranza, A De Meo, R Pantani
Polymer degradation and stability 100, 37-41, 2014
742014
Relevance of mold‐induced thermal boundary conditions and cavity deformation in the simulation of injection molding
R Pantani, V Speranza, G Titomanlio
Polymer Engineering & Science 41 (11), 2022-2035, 2001
652001
Spherulitic nucleation and growth rates in an iPP under continuous shear flow
I Coccorullo, R Pantani, G Titomanlio
Macromolecules 41 (23), 9214-9223, 2008
632008
Molecular orientation in injection molding: experiments and analysis
R Pantani, A Sorrentino, V Speranza, G Titomanlio
Rheologica acta 43 (2), 109-118, 2004
572004
FTIR analysis of hydrolysis in aliphatic polyesters
M Partini, R Pantani
Polymer Degradation and Stability 92 (8), 1491-1497, 2007
532007
Analysis of shrinkage development of a semicrystalline polymer during injection molding
FD Santis, R Pantani, V Speranza, G Titomanlio
Industrial & Engineering Chemistry Research 49 (5), 2469-2476, 2010
452010
Foam injection molding of poly (lactic acid) with environmentally friendly physical blowing agents
R Pantani, V Volpe, G Titomanlio
Journal of Materials Processing Technology 214 (12), 3098-3107, 2014
442014
Improving the predictions of injection molding simulation software
U Vietri, A Sorrentino, V Speranza, R Pantani
Polymer Engineering & Science 51 (12), 2542-2551, 2011
392011
Ejection force of tubular injection moldings. Part II: A prediction model
AJ Pontes, AS Pouzada, R Pantani, G Titomanlio
Polymer Engineering & Science 45 (3), 325-332, 2005
372005
The system can't perform the operation now. Try again later.
Articles 1–20