| The effect of varying cutting speeds on tool wear during conventional and ultrasonic assisted drilling (UAD) of carbon fibre composite (CFC) and titanium alloy stacks AN Dahnel, H Ascroft, S Barnes Procedia Cirp 46, 420-423, 2016 | 45 | 2016 |
| Drilling performance of carbon fiber reinforced epoxy composite when machined dry, with conventional cutting fluid and with a cryogenically cooled tool S Barnes, P Bhudwannachai, AN Dahnel ASME International Mechanical Engineering Congress and Exposition 56192 …, 2013 | 22 | 2013 |
| Analysis of tool wear and hole quality during Ultrasonic Assisted Drilling (UAD) of Carbon Fibre Composite (CFC)/titanium alloy (Ti6Al4V) stacks AN Dahnel, H Ascroft, S Barnes, M Gloger ASME International Mechanical Engineering Congress and Exposition 57366 …, 2015 | 21 | 2015 |
| Tool wear and burr formation during drilling of aluminum alloy 7075 in dry and with cutting fluid AN Dahnel, MH Fauzi, NA Raof, S Mokhtar, NKM Khairussaleh Materials Today: Proceedings 59, 808-813, 2022 | 14 | 2022 |
| A metrological inspection method using micro-CT for the analysis of drilled holes in CFRP and titanium stacks N Kourra, JM Warnett, A Attridge, A Dahnel, H Ascroft, S Barnes, ... The International Journal of Advanced Manufacturing Technology 88, 1417-1427, 2017 | 9 | 2017 |
| An investigation of hole quality during drilling of carbon fibre reinforced plastic and titanium (Ti6Al4V) using tungsten carbide drills AN Dahnel, H Ascroft, S Barnes Materials Today: Proceedings 29, 161-167, 2020 | 8 | 2020 |
| The Effect of Cutting Parameters on Tool Wear in Drilling Aluminium 7075 Nur Munirah Binti Meera Mydin, Aishah Najiah Binti Dahnel, Natasha A. Raof ... TEST Engineering & Management 83, 1274-1280, 2020 | 6 | 2020 |
| The investigation of PVD coating, cryogenic lubrication and ultrasonic vibration on tool wear and surface integrity in manufacturing processes MH Sulaiman, NA Raof, AN Dahnel Journal Tribology 28, 105-116, 2021 | 5 | 2021 |
| Study of Cutting Forces and Surface Roughness in Milling of Carbon Fibre Composite (CFC) With Conventional and and Pressurized CO2 Cutting Fluids AN Dahnel, C Kibbler, S Barnes, H Ascroft ASME International Mechanical Engineering Congress and Exposition 57366 …, 2015 | 5 | 2015 |
| Analysis of defects on machined surfaces of aluminum alloy (Al 7075) using imaging and topographical techniques AN Dahnel, MAA Ghani, NA Raof, S Mokhtar, NKM Khairussaleh International Journal of Metrology and Quality Engineering 13, 12, 2022 | 4 | 2022 |
| Friction and wear behaviours of hard-coated/uncoated bearing steels under nano-additive oil lubrication MH Sulaiman, NH Nordin, NA Sukindar, AN Dahnel, S Kamaruddin Proceedings of the Malaysian International Tribology Conference, 65-68, 2020 | 4 | 2020 |
| Drilling of carbon fibre composites: a review AN Dahnel, S Barnes, P Bhudwannachai Advanced Materials Research 903, 3-8, 2014 | 4 | 2014 |
| Drilling of 7075 Aluminum Alloys AN Dahnel, MNI Naiman, MAMM Farid, AFA Rahman, NMM Mydin Aluminium Alloys-Design and Development of Innovative Alloys, Manufacturing …, 2022 | 3 | 2022 |
| An Experimental Investigation on Drilling of Aluminum Alloy (Al 7075) using High Speed Steel Cutting Tools NFH Abd Halim, AN Dahnel, AA Ismail, NA Zainudin Test Eng. Manag 83, 1451-1456, 2020 | 3 | 2020 |
| Ultrasonic assisted machining H Ascroft, S Barnes, AN Dahnel, A Gupta, NFHB Abd Halim, D Ray UMTIK 2016 The 17th International Conference on Machine Design and …, 2016 | 3 | 2016 |
| Experimental analysis of tool wear when drilling carbon fibre composite (CFC) without cutting fluid, with cutting fluid and with a pre-cryogenically cooled tool AN Dahnel, S Barnes, P Bhudwannachai Applied Mechanics and Materials 372, 512-515, 2013 | 3 | 2013 |
| Comparison of Tool Wear Mechanisms During Drilling of Aluminium Alloy 7075 in Dry and Chilled Air Conditions NMM Mydin, AN Dahnel, NA Raof, NM Khairussaleh, S Mokhtar Journal of Science and Technology 14 (1), 67-74, 2022 | 2 | 2022 |
| The effect of chilled air on burr formation when drilling aluminium alloy in manufacturing industry NM Mydin, AN Dahnel, N Raof, NK Khairussaleh, S Mokhtar Int. J. Progr. Sci. Technolog 28, 437-445, 2021 | 2 | 2021 |
| Optimization study on width of cut and cutting-edge radius during side milling of DAC 55 steel SH Tomadi, NFHA Halim, AN Dahnel, AS Rosman, G Umma Sankar, ... International Conference and Exhibition on Sustainable Energy and Advanced …, 2021 | 1 | 2021 |
| Tribology of Composite Materials and Coatings in Manufacturing MH Sulaiman, NA Raof, AN Dahnel Tribological Applications of Composite Materials, 283-308, 2021 | 1 | 2021 |
