A review of the effect of moulding parameters on the performance of polymeric composite injection moulding SIS Shaharuddin, MS Salit Turkish Journal of Engineering and Environmental Sciences 30 (1), 23-34, 2006 | 60 | 2006 |
Mould flow and component design analysis of polymeric based composite automotive clutch pedals SSS Imihezri, SM Sapuan, S Sulaiman, MM Hamdan, ES Zainuddin, ... Journal of materials processing technology 171 (3), 358-365, 2006 | 38 | 2006 |
Viscosity profiles of phosphate glasses through combined quasi-static and bob-in-cup methods AJ Parsons, N Sharmin, SIS Shaharuddin, M Marshall Journal of Non-Crystalline Solids 408, 76-86, 2015 | 21 | 2015 |
A study of the comparison ofV'andX'ribbing in a composite pedal using mold flow analysis software SSS Imihezri, SM Sapuan, M Ahmad, S Sulaiman Materials & design 26 (2), 157-166, 2005 | 21 | 2005 |
Miscibility, mechanical, and thermal properties of polylactic acid/polypropylene carbonate (PLA/PPC) blends prepared by melt-mixing method I Haneef, YF Buys, NM Shaffiar, SIS Shaharuddin, MKN Khairusshima Materials Today: Proceedings 17, 534-542, 2019 | 20 | 2019 |
Effect of Cinnamon Extraction Oil (CEO) for Algae Biofilm Shelf-Life Prolongation M Othman, H Rashid, NA Jamal, SIS Shaharuddin, S Sulaiman, HS Hairil, ... Polymers 11 (1), 4, 2019 | 10 | 2019 |
Thermal properties, viscosities and densities of (50–x) Na2O–xCaO–50P2O5 glasses SIS Shaharuddin, I Ahmed, D Furniss, AJ Parsons, CD Rudd Glass Technology-European Journal of Glass Science and Technology Part A 53 …, 2012 | 10 | 2012 |
Comparison of simulated and actual product of polymer composite automotive clutch pedal SM Sapuan, SSS Imihezri, S Sulaiman, M Hamdan, ES Zainudin International Journal of Mechanical and Materials Engineering 2 (1), 29-39, 2007 | 10 | 2007 |
EXPERIMENTAL AND FINITE ELEMENT ANALYSIS OF SOLVENT CAST POLY (LACTIC ACID) THIN FILM BLENDS SIS Shaharuddin, AR Mukhtar, NAM Akhir, N Shaffiar, M Othman IIUM Engineering Journal 20 (2), 197-210, 2019 | 3 | 2019 |
Manufacture and characterisation of novel resorbable phosphate based glass fibres for biomedical applications SIS Shaharuddin | 3 | 2012 |
A Review of the Effect of Moulding Parameters on the Performance of Polymeric Composite Injection Moulding SSS Imihezri, SM Sapuan, ES ZAINUDDIN TURKISH JOURNAL OF ENGINEERING AND ENVIRONMENTAL SCIENCES 30 (1), 23-34, 2006 | 3 | 2006 |
Investigation on the thermal properties, density and degradation of quaternary iron and titanium phosphate based glasses SIS Shaharuddin, I Ahmed, D Furniss, AJ Parsons, CD Rudd IOP Conference Series: Materials Science and Engineering 114 (1), 012124, 2016 | 2 | 2016 |
Effect of spinning Parameters on PLA/PPC/Curcumin Microfiber Diameter: An Investigation Via Response Surface Methodology SIS Shaharuddin, AA Fauzan, MFIM Jazi, NAM Akhir, M Othman, ... IIUM Engineering Journal 21 (2), 197-211, 2020 | 1 | 2020 |
The Glass Transition Temperature of Iron and Titanium Containing Phosphate Based Glasses SIS Shaharuddin, I Ahmed, D Furniss, AJ Parsons, CD Rudd Advanced Materials Research 1115, 178-181, 2015 | 1 | 2015 |
The Simulation Study of the Effect of Single and Double Gated Molds on Pressure and Temperature in Injection Molding of Polymeric Composite Clutch Pedals SSS Imihezri, SM Sapuan, S Sulaiman, MM Hamdan, ES Zainudin Multidiscipline Modeling in Materials and Structures, 2006 | 1 | 2006 |
DESIGN, ANALYSIS AND FABRICATION OF GLASS FIBER-REINFORCED PA 6, 6 COMPOSITE AUTOMOTIVE CLUTCH PEDALS SIBTS SHAHARUDDIN | | 2005 |
Design, Analysis and Fabrication of Glass Fiber-reinforced PA6, 6 Composite Automotive Clutch Pedals Sharifah Imihezri bt. Syed Shaharuddin School of Graduates Studies, Universiti Putra Malaysia, 2005 | | 2005 |
DESIGN OF COMPOSITE CLUTCH PEDAL SSS Imihezri, SM Sapuan, M Ahmad, S Sulaiman Sudan Engineering Society, University of Khartoum., 2004 | | 2004 |
DEVELOPING MULTIFILAMENT DRAWING FACILITIES FOR PHOSPHATE GLASSES AJ Parsons, N Sharmin, SIS Shaharuddin, I Ahmed, M Marshall, ... | | |