| Bee wax propolis extract as eco-friendly corrosion inhibitors for 304SS in sulfuric acid F Gapsari, R Soenoko, A Suprapto, W Suprapto International Journal of Corrosion 2015, 2015 | 51 | 2015 |
| Effect of sugar palm fiber surface on interfacial bonding with natural sago matrix H Mardin, ING Wardana, W Suprapto, K Kamil Advances in Materials Science and Engineering 2016, 2016 | 31 | 2016 |
| Extraction and characterization of snail shell waste hydroxyapatite Z Zuliantoni, W Suprapto, PH Setyarini, F Gapsari Results in Engineering 14, 100390, 2022 | 27 | 2022 |
| Kekuatan Tarik dan Porositas Hasil Sambungan Las Gesek Aluminium 6061 dengan Berbagai Suhu Aging PE Setyawan, YS Irawan, W Suprapto Rekayasa Mesin 5 (2), 141-148, 2014 | 26 | 2014 |
| Teknologi Pengecoran Logam W Suprapto Universitas Brawijaya Press, 2017 | 19 | 2017 |
| Pengaruh waktu dan tekanan gesek terhadap kekuatan tarik sambungan paduan aluminium dan baja karbon pada pengelasan gesek continuous drive JCA Pah, YS Irawan, W Suprapto Rekayasa Mesin 9 (1), 51-59, 2018 | 18 | 2018 |
| Sea water effects on surface morphology and interfacial bonding of sugar palm fiber to sago matrix H Mardin, ING Wardana, K Kusno, P Pratikto, S Wahyono Key Engineering Materials 724, 39-42, 2017 | 14 | 2017 |
| Effect of organics corrosion inhibitors on the corrosion of 304SS in 3.5% NaCl F Gapsari, R Soenoko, A Suprapto, W Suprapto International Review of Mechanical Engineering (I. RE. ME) 10 (7), 531-536, 2016 | 14 | 2016 |
| The role of diffusion media in nitriding process on surface layers characteristics of AISI 4140 with and without hard chrome coatings KA Widi, I Wardana, W Suprapto, YS Irawan Tribology in Industry 38 (3), 2016 | 14 | 2016 |
| White layer control on AISI 316L using temperature and gas nitriding diffusion stage process KA Widi, W Wardana, WO Suprapto, YS Irawan International Review of Mechanical Engineering (I. RE. ME), 11 (8), 613-618, 2017 | 12 | 2017 |
| Kekuatan Puntir dan Porositas Hasil Sambungan Las Gesek AlMg-Si dengan Variasi Chamfer dan Gaya Tekan Akhir DA Tyagita, YS Irawan, W Suprapto Rekayasa Mesin 5 (1), 69-74, 2014 | 12 | 2014 |
| Enhancing hardness and wear resistance of ZrSiO4-SnO2/Cu10Sn composite produced by warm compaction and sintering IA Wahyudie, R Soenoko, W Suprapto, YS Irawan metalurgija 59 (1), 27-30, 2020 | 11 | 2020 |
| The effect of palm fibers addition on density, porosity, water discharge and TDS of the natural zeolite ceramic SMB Respati, R Soenoko, YS Irawan, W Suprapto, DK Wicaksono, ... AIP Conference Proceedings 1977 (1), 2018 | 11 | 2018 |
| Comparation of the analytical and experimental models of 304SS corrosion rate in 0.5 m H2SS4 with bee wax propolis extract W Suprapto, R Soenoko, F Gapsari Engineering Review: Međunarodni časopis namijenjen publiciranju originalnih …, 2018 | 11 | 2018 |
| Minimization of corrosion rate using surface response methodology F Gapsari Madhifitri, R Soenoko, A Suprapto, W Suprapto Engineering Review: Međunarodni časopis namijenjen publiciranju originalnih …, 2018 | 11* | 2018 |
| The inhibition of 304SS in hydrochloric acid solution by cera alba extract W Suprapto, R Soenoko, A Suprapto, F Gapsari Journal of engineering science and technology 12 (8), 2078-2090, 2017 | 11 | 2017 |
| Characterization of aluminium matrix composite of Al-ZnSiFeCuMg alloy reinforced with silica sand tailings particles R Soenoko, W Suprapto, YS Irawan Journal of Mechanical Engineering and Sciences 14 (3), 7094-7108, 2020 | 10 | 2020 |
| The design and performance of continuous porang (Amorphophallus muelleri blume) flour mills MB Hermanto, SB Widjanarko, W Suprapto, A Suryanto International Journal on Advanced Science, Engineering, and Information …, 2019 | 10 | 2019 |
| Parameter Optimization of Ball Milling Process for Silica Sand Tailing R Soenoko, W Suprapto, YS Irawan IOP Conference Series: Materials Science and Engineering 494 (1), 012073, 2019 | 8 | 2019 |
| Effect of diamond-like carbon thin film on the fatigue strength of AISI 4340 steel T Sujitno, E Mulyani, WA Suprapto, D Suharlan, V Malau Adv. Mater. 8 (1), 21-26, 2019 | 8 | 2019 |
