Hot corrosion studies of HVOF-sprayed coating on T-91 boiler tube steel at different operating temperatures R Bhatia, H Singh, BS Sidhu Journal of materials engineering and performance 23, 493-505, 2014 | 40 | 2014 |
Behaviour of carbon nanotubes-Cr2O3 thermal barrier coatings in actual boiler K Goyal, H Singh, R Bhatia Surface Engineering 36 (2), 124-134, 2020 | 29 | 2020 |
Hot corrosion studies of plasma-sprayed chromium oxide coatings on boiler tube steel at 850 C in simulated boiler environment G Singh, K Goyal, R Bhatia Iranian Journal of Science and Technology, Transactions of Mechanical …, 2018 | 29 | 2018 |
Experimental investigations of carbon nanotubes reinforcement on properties of ceramic-based composite coating K Goyal, H Singh, R Bhatia Journal of the Australian Ceramic Society 55 (2), 315-322, 2019 | 25 | 2019 |
Mechanical and microstructural properties of carbon nanotubes reinforced chromium oxide coated boiler steel K Goyal, H Singh, R Bhatia World Journal of Engineering 15 (4), 429-439, 2018 | 25 | 2018 |
Hot-corrosion behavior of Cr2O3-CNT-coated ASTM-SA213-T22 steel in a molten salt environment at 700°C K Goyal, H Singh, R Bhatia International Journal of Minerals, Metallurgy, and Materials 26, 337-344, 2019 | 24 | 2019 |
High Temperature Behavior of Cr3C2-NiCr Coatings in the Actual Coal-Fired Boiler Environment R Bhatia, HS Sidhu, BS Sidhu Metallurgical and Materials Transactions E 2, 70-86, 2015 | 24 | 2015 |
Hot corrosion behaviour of carbon nanotubes reinforced chromium oxide composite coatings at elevated temperature K Goyal, H Singh, R Bhatia Materials Research Express 5 (11), 116408, 2018 | 22 | 2018 |
Cyclic high temperature corrosion studies of carbon nanotubes-Cr2O3 composite coatings on boiler steel at 900°C in molten salt environment K Goyal, H Singh, R Bhatia Anti-Corrosion Methods and Materials 65 (6), 646-657, 2018 | 20 | 2018 |
Current status of thermal spray coatings for high temperature corrosion resistance of boiler steel K Goyal, H Singh, R Bhatia Journal of Material & Metallurgical Engineering 6 (1), 29-35, 2016 | 17 | 2016 |
Effect of Composition of Powder Mixed Dielectric Fluid on Performance of Electric Discharge Machining S Singh, H Singh, J Singh, R Bhatia National Conference on Advancements and Futuristic Trends in Mechanical and …, 2011 | 11 | 2011 |
Hot corrosion behaviour of CNT-reinforced zirconium yttrium composite coating at elevated temperature S Kumar, R Bhatia, H Singh Materials Today: Proceedings 28, 1530-1539, 2020 | 9 | 2020 |
Impact of added titanium oxide in dielectric of EDM on surface characteristics and MRR SS Chatha, R Bhatia, HS Sidhu Proc. Nat. Conf. Advancements and Futuristics Trends in Mech. Mater. Eng, 2010 | 9 | 2010 |
Effect of carbon nanotubes on properties of ceramics based composite coatings K Goyal, H Singh, R Bhatia Advanced Engineering Forum 26, 53-66, 2018 | 8 | 2018 |
Hot Corrosion Behaviour of CNT Reinforced Zirconium Yttrium Coatings in Molten Salt Environment S Kumar, R Bhatia, H Singh Journal of Bio-and Tribo-Corrosion 6, 1-9, 2020 | 5 | 2020 |
A comparative study of cellular service provider operating in Bathinda V Bansal, H Singh, R Bhatia International Journal of Computing and Corporate Research 1 (3), 1-14, 2011 | 3 | 2011 |
High-temperature corrosion behaviour of CNT-reinforced zirconium yttrium coatings on boiler tube steel in coal-fired boiler of thermal power plant S Kumar, R Bhatia, H Singh Journal of Failure Analysis and Prevention 20, 2029-2039, 2020 | 2 | 2020 |
Comparative Analysis of Surface Roughness of Untreated and Cryo Treated H-11 Die Steel by WEDM R Bhatia, S Kumar Int J Mech Eng Robot.(IJMER) 3, 2321-5747p, 2014 | 2 | 2014 |
The Effect of Process Parameters on the Performance Characteristics of Wire Electrical Discharge Machining of AISI D3 Tool Steel S Bedi, K Goyal, C Singh, R Bhatia IUP Journal of Mechanical Engineering 10 (4), 20-34, 2017 | 1 | 2017 |
The Effect of Process Parameters on the Performance Characteristics of Wire Electrical Discharge Machining of AISI D3 Tool Steel S Bedi, K Goyal, C Singh, R Bhatia IUP Journal of Mechanical Engineering 10 (4), 20-34, 2017 | 1 | 2017 |