Development of material-adapted processing strategies for laser sintering of polyamide 12 S Greiner, A Jaksch, S Cholewa, D Drummer Advanced Industrial and Engineering Polymer Research 4 (4), 251-263, 2021 | 23 | 2021 |
Inline quality control through optical deep learning-based porosity determination for powder bed fusion of polymers S Schlicht, A Jaksch, D Drummer Polymers 14 (5), 885, 2022 | 6 | 2022 |
Thin-Walled Part Properties in Powder Bed Fusion of Polymers—A Comparative Study on Temperature Development and Part Performance Depending on Part Thickness and Orientation A Jaksch, S Cholewa, D Drummer Journal of Manufacturing and Materials Processing 7 (3), 96, 2023 | 2 | 2023 |
Tailored Syndiotactic Polypropylene Feedstock Material for Laser-Based Powder Bed Fusion of Polymers: Material Development and Processability S Cholewa, L Stieglitz, A Jaksch, B Rieger, D Drummer ACS Applied Polymer Materials 5 (4), 2430-2439, 2023 | 2 | 2023 |
Coalescence behavior of polyamide 12 as function of zero-shear viscosity and influence on mechanical performance S Cholewa, A Jaksch, D Drummer | 2 | 2022 |
Thin-Walled Part Properties in PBF-LB/P—Experimental Understanding and Nonlocal Material Model A Jaksch, M Spinola, C Cholewa, L Pflug, M Stingl, D Drummer | 1 | 2022 |
Inline Quality Control through Optical Deep Learning-Based Porosity Determination for Powder Bed Fusion of Polymers. Polymers 2022, 14, 885 S Schlicht, A Jaksch, D Drummer s Note: MDPI stays neutral with regard to jurisdictional claims in published …, 2022 | 1 | 2022 |
Understanding geometry dependent part behavior of thin walled structures in powder bed fusion of polymers A Jaksch, S Cholewa, D Drummer Procedia CIRP 111, 28-32, 2022 | 1 | 2022 |
From trash to treasure in additive manufacturing: Recycling of polymer powders by acid catalyzed hydrolysis N Hesse, A Jaksch, J Kaschta, D Groh, D Drummer, W Peukert, J Schmidt Additive Manufacturing 71, 103591, 2023 | | 2023 |
Analysis of Flow Additives in Laser-Based Powder Bed Fusion of Polymers: Implications for Flow Behavior, Processing, Temperature Profile, and Part Characteristics S Cholewa, A Jacksch, D Drummer University of Texas at Austin, 2023 | | 2023 |
Enhancing the Thermal Stability of Polyamide 6 in Powder Bed Fusion via Primary and Secondary Antioxidant Incorporation A Jacksch, C Cholewa, D Drummer University of Texas at Austin, 2023 | | 2023 |
Materialangepasste Prozessstrategien für das Lasersintern von Kunststoffen S Greiner, A Jaksch, D Drummer 27. Technomer, 2021 | | 2021 |
Understanding Cylinder Temperature Effects in Laser Beam Melting of Polymers S Greiner, A Jaksch, D Drummer Enhanced Material, Parts Optimization and Process Intensification …, 2021 | | 2021 |
Selektives Laserstrahlschmelzen von Polyamid 12-Einfluss von Fließhilfsmitteln auf Verarbeitbarkeit und Bauteileigenschaften Selective laser sintering of polyamide 12-Effect of … A Jaksch, N Hesse, J Schmidt, D Drummer Proceedings of the 17th Rapid. Tech 3D Conference Erfurt, Germany, 22–23 …, 2021 | | 2021 |
Kunststoffpulver für die Additive Fertigung: Vorhersage des Prozessverhaltens mittels prozessangepasster Analyse / Plastic powder for Additive Manufacturing: Prediction of … K Wudy, J Schmidt, L Lanzl, M Zhao, A Jaksch, M Dechet, N Hesse, ... 7. Industriekolloquium des Sonderforschungsbereichs 814 – Additive Fertigung, 2019 | | 2019 |
Interaktion der Ausgangspulverkennwerte und der Belichtungsparameter im selektiven Laserstrahlschmelzen von Kunststoffen auf resultierende Bauteileigenschaften A Jaksch, K Wudy, D Drummer Proceedings of the 16th Rapid.Tech Conference, Erfurt, 2019 | | 2019 |
Selektives Laserstrahlschmelzen von Kunststoffen: Lokale Bauteileigenschaften in Abhängigkeit unterschiedlicher Alterungszustände des Ausgangspulvers A Jaksch, N Hesse, D Drummer, J Schmidt 6. Industriekolloquium des Sonderforschungsbereichs 814 – Additive Fertigung,, 2018 | | 2018 |
Experimentelle und simulative Untersuchung der zeit- und ortsaufgelösten Temperaturfelder beim selektiven Strahlschmelzen von Kunststoffen S Greiner, D Soldner, A Jaksch, M Zhao, J Mergheim, P Steinmann, ... 6. Industriekolloquium des Sonderforschungsbereichs 814 – Additive Fertigung, 2018 | | 2018 |