| Three dimensional cfd simulations of a wind turbine blade section; validation PI Muiruri, OS Motsamai J. Eng. Sci. Technol. Rev 11 (1), 138-145, 2018 | 24 | 2018 |
| A comparative study of RANS-based turbulence models for an upscale wind turbine blade PI Muiruri, OS Motsamai, R Ndeda SN Applied Sciences 1 (3), 237, 2019 | 23 | 2019 |
| Optimization of polygonal cross-sectioned conformal cooling channels in injection molding LW Simiyu, JM Mutua, PI Muiruri, BW Ikua International Journal on Interactive Design and Manufacturing (IJIDeM), 1-17, 2023 | 5 | 2023 |
| Three-dimensional effects of trailing edge flap and winglet integrated on up-scale wind turbine blade OS Motsamai, PI Muiruri IOP Conference Series: Earth and Environmental Science 354 (1), 012083, 2019 | 3 | 2019 |
| Thermal performance analysis of near infra-red reflection and green roof cooling techniques on buildings made of mild steel NP Mdlalose, M Muvengei, P Muiruri, U Mutwiwa Renewable Energy and Environmental Sustainability 8, 13, 2023 | 1 | 2023 |
| Computational Effects of Winglet Tilted Within Range of-45° and+ 45° on the Up-Scale Wind Turbine Blade Using CFD. PI Muiruri, OS Motsamai Mathematical Modelling of Engineering Problems 7 (1), 2020 | 1 | 2020 |
| A comprehensive experimental characterization of cement mortar containing sodium sulfate dehydrate/calcium chloride hexahydrate/graphite shape-stable PCM for enhanced thermal … MB Belete, E Murimi, PI Muiruri, J Munyalo Results in Engineering 22, 102028, 2024 | | 2024 |
| Effect of conformal cooling design on residual stresses in injection molded parts LW Simiyu, JM Mutua, PI Muiruri, BW Ikua International Journal on Interactive Design and Manufacturing (IJIDeM), 1-16, 2024 | | 2024 |
| Robust Multi-Response Optimization of Productivity and Product Quality in Injection Molding using Taguchi Grey Technique LW Simiyu, JM Mutua, PI Muiruri, BW Ikua, SG Ngigi | | 2024 |
| Simultaneous Optimization of Product Quality and Productivity for Multi-Factor designs of Circular Cross-Section Conformal Cooling Channels in Injection Molds LW Simiyu, JM Mutua, PI Muiruri, BW Ikua, SN Gacharu | | 2023 |
| Multi-objective Optimization of Conformal Cooling Channel Design in Injection Molds Using Taguchi Grey Relational analysis LW Simiyu, JM Mutua, PI Muiruri, BW Ikua, SN Gacharu | | 2023 |
| Fatigue Loads Mitigation on Horizontal Axis Wind Turbines Using Aerodynamic Devices. A Survey PI Muiruri, OS Motsamai Journal of Engineering Science and Technology Review 10 (5), 144 - 152, 2017 | | 2017 |
Oboetswe Seraga MotsamaiProfessor of mechanical. University of BotswanaVerified email at mopipi.ub.bw
