| Research trends in laser powder bed fusion of Al alloys within the last decade IM Kusoglu, B Gökce, S Barcikowski Additive Manufacturing 36, 101489, 2020 | 113 | 2020 |
| Equilibrium and kinetics for the sorption of promethazine hydrochloride onto K10 montmorillonite G Gereli, Y Seki, İM Kuşoğlu, K Yurdakoç Journal of colloid and interface science 299 (1), 155-162, 2006 | 101 | 2006 |
| Microstructure formation and mechanical properties of ODS steels built by laser additive manufacturing of nanoparticle coated iron-chromium powders C Doñate-Buendia, P Kürnsteiner, F Stern, MB Wilms, R Streubel, ... Acta Materialia 206, 116566, 2021 | 90 | 2021 |
| Tribological behavior of Cr2O3 coatings as bearing materials H Cetinel, E Celik, MI Kusoglu Journal of Materials processing technology 196 (1-3), 259-265, 2008 | 67 | 2008 |
| Wear behavior of flame-sprayed Al2O3–TiO2 coatings on plain carbon steel substrates IM Kusoglu, E Celik, H Cetinel, I Ozdemir, O Demirkurt, K Onel Surface and Coatings Technology 200 (1-4), 1173-1177, 2005 | 54 | 2005 |
| Silicon carbide particle reinforced mullite composite foams S Akpinar, IM Kusoglu, O Ertugrul, K Onel ceramics international 38 (8), 6163-6169, 2012 | 43 | 2012 |
| Laser powder bed fusion of polymers: Quantitative research direction indices IM Kusoglu, C Doñate-Buendía, S Barcikowski, B Gökce Materials 14 (5), 1169, 2021 | 38 | 2021 |
| In situ mullite foam fabrication using microwave energy S Akpinar, IM Kusoglu, O Ertugrul, K Onel Journal of the European Ceramic Society 32 (4), 843-848, 2012 | 35 | 2012 |
| Microwave assisted sintering of in-situ cordierite foam S Akpinar, İM Kuşoğlu, O Ertugrul, K Onel Ceramics International 41 (7), 8605-8613, 2015 | 29 | 2015 |
| Influence of zircon particle size on conventional and microwave assisted reaction sintering of in-situ mullite–zirconia composites O Ertugrul, R Dalmis, S Akpinar, IM Kusoglu, E Celik Ceramics International 42 (9), 11104-11117, 2016 | 18 | 2016 |
| High temperature behaviour of H13 steel C Tekmen, M Toparli, I Ozdemir, IM Kusoglu, K Onel International Journal of Materials Research 96 (12), 1431-1433, 2022 | 14 | 2022 |
| Effects of coil design on induction welding of sintered iron based compacts U Çavdar, IM Kusoglu Materials Testing 56 (11-12), 973-979, 2014 | 13 | 2014 |
| Use of (nano-) additives in Laser Powder Bed Fusion of Al powder feedstocks: Research directions within the last decade IM Kusoglu, B Gökce, S Barcikowski Procedia CIRP 94, 11-16, 2020 | 12 | 2020 |
| Nanoparticle Additivation Effects on Laser Powder Bed Fusion of Metals and Polymers—A Theoretical Concept for an Inter-Laboratory Study Design All Along the Process Chain … IM Kusoglu, F Huber, C Doñate-Buendía, A Rosa Ziefuss, B Gökce, ... Materials 14 (17), 4892, 2021 | 9 | 2021 |
| The effect of graphene nanoplatelets on the wear properties of high-frequency induction sintered alumina nanocomposites A Altintaş, U Çavdar, İM Kuşoğlu Journal of Inorganic and Organometallic Polymers and Materials 29, 667-675, 2019 | 9 | 2019 |
| Demir esaslı metal tozlarından geleneksel ve mikrodalga sinterleme yöntemleri ile malzeme üretimi ve özelliklerinin karşılaştırılması İM Kuşoğlu Fen Bilimleri Enstitüsü, 2011 | 9 | 2011 |
| The effects of graphene nanoplatelet addition to in situ compacted alumina nanocomposites using ultra-high frequency induction sintering system İM Kuşoğlu, U Çavdar, A Altintaş Journal of the Australian Ceramic Society 56 (1), 233-241, 2020 | 8 | 2020 |
| Microwave Assisted Reaction Sintering of ZrSiO4/α -Al2O3 Mixtures O Ertugrul, S Akpinar, IM Kusoglu, K Onel Advances in Science and Technology 63, 91-96, 2011 | 5 | 2011 |
| Microstructure and corrosion properties of PBF-LB produced carbide nanoparticles additivated AlSi10Mg parts IM Kusoglu, P Vieth, S Heiland, F Huber, A Lüddecke, AR Ziefuss, ... Procedia CIRP 111, 10-13, 2022 | 4 | 2022 |
| Effect of Curing Conditions and BaTiO3 Nanoparticle Addition on Dielectric Constant of PDMS for EAP Applications. BS Akdemir, IM Kusoglu Acta Physica Polonica: A 139 (2), 2021 | 3 | 2021 |
