Three-dimensional digital image correlation technique using single high-speed camera for measuring large out-of-plane displacements at high framing rates M Pankow, B Justusson, AM Waas Applied optics 49 (17), 3418-3427, 2010 | 126 | 2010 |
High-speed 3D digital image correlation of low-velocity impacts on composite plates M Flores, D Mollenhauer, V Runatunga, T Beberniss, D Rapking, ... Composites Part B: Engineering 131, 153-164, 2017 | 93 | 2017 |
Specimen size and shape effect in split Hopkinson pressure bar testing M Pankow, C Attard, AM Waas The Journal of Strain Analysis for Engineering Design 44 (8), 689-698, 2009 | 77 | 2009 |
Split Hopkinson pressure bar testing of 3D woven composites M Pankow, A Salvi, AM Waas, CF Yen, S Ghiorse Composites Science and Technology 71 (9), 1196-1208, 2011 | 65 | 2011 |
Resistance to delamination of 3D woven textile composites evaluated using End Notch Flexure (ENF) tests: Experimental results M Pankow, A Salvi, AM Waas, CF Yen, S Ghiorse Composites Part A: Applied Science and Manufacturing 42 (10), 1463-1476, 2011 | 55 | 2011 |
Modeling of 3D woven composites using the digital element approach for accurate prediction of kinking under compressive loads S Joglekar, M Pankow Composite Structures 160, 547-559, 2017 | 54 | 2017 |
Modeling the response, strength and degradation of 3D woven composites subjected to high rate loading M Pankow, AM Waas, CF Yen, S Ghiorse Composite Structures 94 (5), 1590-1604, 2012 | 53 | 2012 |
Effect of fiber architecture on tensile fracture of 3D woven textile composites M Pankow, B Justusson, M Riosbaas, AM Waas, CF Yen Composite Structures, 111139, 2019 | 45 | 2019 |
Point of impact: the effect of size and speed on puncture mechanics PSL Anderson, J LaCosse, M Pankow Interface focus 6 (3), 20150111, 2016 | 38 | 2016 |
A new lamination theory for layered textile composites that account for manufacturing induced effects M Pankow, AM Waas, CF Yen, S Ghiorse Composites Part A: Applied Science and Manufacturing 40 (12), 1991-2003, 2009 | 35 | 2009 |
Use of a shock tube to determine the bi-axial yield of an aluminum alloy under high rates B Justusson, M Pankow, C Heinrich, M Rudolph, AM Waas International Journal of Impact Engineering 58, 55-65, 2013 | 32 | 2013 |
Shock response of 3D woven composites: an experimental investigation M Pankow, B Justusson, A Salvi, AM Waas, CF Yen, S Ghiorse Composite Structures 93 (5), 1337-1346, 2011 | 29 | 2011 |
Soft Body Armor Time-Dependent Back Face Deformation (BFD) with Ballistics Gel Backing T Goode, G Shoemaker, S Schultz, K Peters, M Pankow Composite Structures, 2019 | 27 | 2019 |
Shock loading of 3D woven composites: A validated finite element investigation M Pankow, AM Waas, CF Yen, S Ghiorse Composite Structures 93 (5), 1347-1362, 2011 | 26 | 2011 |
The effect of the through-thickness yarn component on the in-and out-of-plane properties of composites from 3D orthogonal woven preforms M Midani, AF Seyam, MN Saleh, M Pankow The Journal of The Textile Institute, 1-11, 2018 | 24 | 2018 |
Performance evaluation of two progressive damage models for composite laminates under various speed impact loading S Sridharan, M Pankow International Journal of Impact Engineering 143, 103615, 2020 | 22 | 2020 |
Ballistic impact behavior of woven ceramic fabric reinforced metal matrix composites B McWilliams, J Yu, M Pankow, CF Yen International Journal of Impact Engineering 86, 57-66, 2015 | 22 | 2015 |
The Influence of Powder Reuse on the Properties of Nickel Super Alloy ATI 718™ in Laser Powder Bed Fusion Additive Manufacturing C Rock, C Ledford, M Garcia-Avila, H West, VM Miller, M Pankow, ... Metallurgical and Materials Transactions B 52, 676-688, 2021 | 21 | 2021 |
Interaction of delaminations and matrix cracks in a CFRP plate, Part I: A test method for model validation M McElroy, W Jackson, R Olsson, P Hellström, S Tsampas, M Pankow Composites Part A: Applied Science and Manufacturing, 2017 | 21 | 2017 |
Flexural behavior of a layer-to-layer orthogonal interlocked three-dimensional textile composite D Zhang, AM Waas, M Pankow, CF Yen, S Ghiorse Journal of Engineering Materials and Technology 134 (3), 031009, 2012 | 21 | 2012 |