… with the finding [18] that the (111) single crystal curve is on a somewhat higher level than the
stress … The principal difference between the behaviour of 99.99~~ and 99.5% aluminum is the
absence of grain-boundary strengthening at intermediate strains in 99.5% aluminium …

… This is true for single crystals and polycrystals … Data on aluminium at half the melting temperature
[38) … Figure 8 illustrates data for aluminum single crys- tals deformed in single slip at half the
melting tem- perature [38] (similar data have been obtained for ~lycrys~lline aluminum …

… E. Internal-standard analysis for one component, interfering lines of unknown and standard … A.
Double-Exposure Technique (DET). B. Single-Exposure Technique (SET). C. General
Considerations … B. Aluminum Alloy 2024 and Ingot Iron: Determination of Elastic constants …

… longer homogeneous and should show a spall strength close to that of polycrystalline aluminum.
However, even at highest tem- peratures the single crystals show a higher strength than
polycrystalline … If melting did not occur one has to conclude that super- heated solid states …

… Franciosi P, Berveiller M and Zaoui A 1980 Latent hardening in copper and aluminium single
crystals Acta Metall … 1 1121. Kocks UF and Brown TJ 1966 Latent hardening in aluminum Acta
Metall … C and Sidoroff F 1976 A finite theory of the elastoviscoplasticity of single crystals Int …

… applied to predict the deformation of metals such as copper (Estrin and Mecking, 1984) and
aluminum (Estrin, 1998) … (5) represents the velocity of a single gliding dislocation and not the
average velocity calculated over all dislocation gliding on one slip system …

… The main purpose of the experiments described below was to separate these two effects of
temperature, using single crystals of aluminium for the sake of … The general method was to strain
each crystal substantially at one temperature and, at intervals, to interrupt this straining …

… SINGLE-CRYSTAL EXPERIMENTS A. Procedure A high-purity aluminum single crystal was
produced using the Bridgman … be shown later-the sur- face may contain a greater fraction of one
type of … to produce a spread of intensities even for the undeformed single crystal (Figure 2 …

… to consider all SiC/A1 composites, regardless of rein- forcement type, as a single class of … allowing
established aluminum component design to be used, and allowing conventional aluminum
metalworking and … portion of this range, a smooth 45 deg chisel formed at one edge and …